Coating Thickness Gauges

Product Details:

COAT SCOPE PRO

Model Metrix+ Coat Scope ProMeasuring principle Magnetic induction(F) & Eddy Current (NF)Measuring range 0 - 2000umAccuracy ±(2% + 1um)Resolution 0.1um (0~100um)1um (> 100um)Calibration Zero point and multi-point calibrationStorage 10*13*10 measurement dataStatistics Number of Readings, Max, Min, Mean, Sample Standard Deviation, Coefficient of Variation, Number below Limit, Number above LimitUnits um, mm, mils, inch Minimum curvature radius 5mm(convex)25mm(concave)Minimum measuring area Diameter 15mmMinimum thickness of substrate 0.20mm(F)0.03mm(NF)Power supply 2 x 1.5V AA batteryOperation environment Temperature: -10 to 50℃Humidity: 20 ~ 90% RHStorage environment Temperature: -20 to 60℃Humidity: 20 ~ 90% RHPage 2 of 2 Rev 0121.02Features picturesModel and Specifications subject to change without notice.Size 146mm × 76mm × 32mmMaterial and weight ABSWeight 137g (not including batteries)Standard AccessoriesCoating Thickness Gauge with probe, ‘0’ calibration block, standard foils, batteries, factory calibration certificate, technical manual, hard carry case.

Product Details:

Model Metrix+ Coat Gauge FN xL
Measuring principle Magnetic induction(F) & Eddy Current(NF)Measuring range 0 to 1500um (0 to 59mils)Accuracy ±(2.5%+2um)±(2.5%+0.08mil)Resolution 0.1um/0.01milCalibration Zero Calibration, Multi-Points CalibrationUnits um , milsMinimum curvature radius 1.5mm(convex)25mm(concave)Minimum measuring area Diameter 6mmMinimum thickness of substrate 0.5mm(0.02”)(F)0.3mm(0.012”)(NF)Power supply 4 x 1.5V AAA batteryOperation environment Temperature: 0 to 40℃(32 to 104℉)； Humidity: 20% to 90%rhSize 155mm×62mm×35mm(6.10"×2.44"×1.38")Weight 125g(4.14 oz)Standard Accessories Coating Thickness Gauge, ‘0’ calibration block, standard foils, batteries, Technical manual

This instrument has an in-built probe which uses the principle of electromagnetic induction to measure the thickness of non-magnetic coatings on magnetic substrates(steel/iron) and eddy current principle to measure thickness of nonconductive coatings on non-magnetic substrates(aluminium, copper, brass).The Gauge is designed for non-destructively measuring the thickness of coating and painting. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and able to work steadily in the laboratory, workshop and outdoors.COATING THICKNESS GAUGECOAT GAUGE FN xLBest valueMeasuring principle ApplicationsFeatures▪ Large Display for better readability.▪ Zero-point calibration and multi-point calibration.▪ Two measure modes: single and continuous.▪ Selectable um/mil measuring units.

Product Details:

GM200/ CT100/ EUROLAB CT100

Description:  
GM200 Digital 0-1.8mm/0.01mm LCD Coating Thickness Gauge Car Painting Thickness Tester Paint Thickness Meter Car Diagnostic Tool

This product is a portable coating thickness gauge for fast, accurate and nondestructive measurement of the thickness of non-magnetic coatings (such as paint and film) on magnetic metal substrates.Has seen wide application in manufacture, metal working,chemical industry, commodity inspection and other fields. Specification:
 Measuring range: 0-1.8mm/ 0-71.0milResolution : 0.01mm/0.1milMeasurement error: ±0.03Min.diameter of substrate: 50mmMin.thickness of substrate: 0.5mmOperating temperature range:0~40°cOperating humidity range:10-95%RH
 Packing method: Blister CardPower supply: 21.5V AAA battery(battery not included )Weight: 63.98g (without battery)overall Dimension: 65 x 31 x 108mm
Color: Orange / Blue send randomly~ Package includeS:
 1 x GM200 Coating Thickness Gauge(battery not include)1 x English user Manual6 x Different Size Film

Product Details:

Model Metrix+ Coat Measurer FInternational Standard It meets the standards of both ISO 2178 and ISO 2361 as well as DIN, ASTM and BS. Measuring principle Magnetic induction(F)Display 4 digits backlit LCDMeasuring range 0 - 1250um (0 - 50mils)Accuracy ±1-3%n or +2.5umResolution 0.1um(0~99.9um); 1um(over 100um)Units um /milsMinimum curvature radius 1.5mm(convex)25mm(concave)Minimum measuring area Diameter 6mmMinimum thickness of substrate 0.3mmAdditional features Low Battery Indicator, Auto power offPower supply 4 x 1.5V AAA batteryOperation environment Temperature: 0 to 50℃ ; Humidity: < 95%Size & Weight 145mm × 65mm × 25mm; 145g(not including batteries)Standard Accessories Coating Thickness Gauge, F probe, ‘0’ calibration block, standard foils, batteries, technical manual, hard carry case.Optional Accessories PC interface(cable and software)

This instrument has an external probe which uses the principle of electromagnetic induction to measure the thickness of non-magnetic coatings on magnetic substrates.The Instrument is designed for non-destructively measuring the thickness of coatings on ferrous substrates. It can be used to measure thickness of paint, galvanizing layer, lacquer layer, porcelain enamel, phosphide layer, copper tile, etc.COATING THICKNESS GAUGECOAT MEASURER FReliableMeasuring principle ApplicationsFeatures▪ Backlit LCD Display.▪ Zero-point calibration and multi-point calibration.▪ Two measure modes: single and continuous.

Product Details:

Brand: Metrix
Product Code: METRIX COAT SCOPE -27
Reward Points: 0
Availability: In Stock

Features

ltcan be used both in the laboratory and in harsh field conditions.
Performs two different method of calculating coating measurement by utilizing characteristic of both eddy current and magnetic induction both non-destructive and accurate.
Can measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium , chrome etc.) on magnetic materials (e.g. iron, nickel etc.) .
Often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.
Can measure the thickness of non-magnetic Coatings on non-magnetic metals.
lt is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminium, brass, non-magnetic stainless steel, etc.Unique Single probe Used to Measure "Fe" (ferrous) "nFe" (non-ferrous) substrates.
Automatic substrate recognition. * Manual or automatic shut down. *Two measurement mode: Single and Continuous * Wide measuring range and high resolution. * Metricllmperial conversion. *
Digital backlit display gives exact reading with no guessing or errors.
Max/Min/Ave reading *99 Measurement memory can be stored/Recall
PC Interface with optional RS 232C cable Software.
Model Metrbr Coat Scope - i (Integrated Probe) Metrbr Coat Scope 27
International Standard lt meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTM and BS.
Display 4 digits LCD, backlit
Measuring range 0-2000um/0-80mil
Resolution 0.1 pm (0—99.9pm); 1 pm (over 100pm)
Accuracy 11-3%n or ;2.5pm
Memory Store/Recall Min/Max/Ave. 99 Group Measurements
Mm- radius Work piece F; Convex 1.5mm/Concave 25mm
NF: Convex 3mm/ Concave 50mm
Min.measuring area 6mm

Min. sample thickness 0.3mm
Metric/Imperial Selectable
Operating condition Temp. 0—50°C ; Humidity <95%
Battery indicator low battery indicator
Auto Power off .
Power supply 2x1.5V AAA(UM-4)battery
Dimensions & weight 130x65x35 mm 90g(not including battery)
Standard Accessories Probe (F/nF combine)‘0' Calibration Blocks, Calibration Foils, Operation Manual & Hard Carry case
Optional accessories RS-232C Cable & software, USB Cable & software, Bluetooth data output.

Product Details:

Brand: Metrix
Product Code: METRIX Coat Scope - i(INTEGRETED PROBE)
Reward Points: 0
Availability: In Stock

METRIX COAT SCOPE -i (INTEGRETED PROBE)

Features:

ltcan be used both in the laboratory and in harsh field conditions.
Performs two different method of calculating coating measurement by utilizing characteristic of both eddy current and magnetic induction both non-destructive and accurate.
Can measure the thickness of non-magnetic materials(e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium,chrome etc.) on magnetic materials (e.g. iron, nickel etc.) .
Often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.
Can measure the thickness of non-magnetic Coatings on non-magnetic metals.
lt is used on anodizing, varnish, paint, enamel,plastic coatings, powder, etc. applied to aluminium, brass, non-magnetic stainless steel, etc.
Unique Single probe Used to Measure "Fe" (ferrous) "nFe" (non-ferrous) substrates.
Automatic substrate recognition.Manual or automatic shut down. Two measurement mode: Single and Continuous Wide measuring range and high resolution.Metricllmperial conversion.Digital backlit display gives exact reading with no guessing or errors.
Max/Min/Ave reading 99 Measurement memory can be stored/Recall.
PC Interface with optional RS 232C cable Software.
Model Metrbr Coat Scope - i (Integrated Probe) Metrbr Coat Scope 27
International Standard :lt meets the standards of both |SO2178 and ISO 2361 as well as DIN, ASTM and BS.
Display: 4 digits LCD, backlit
Measuring range:0-2000um/0-80mil
Resolution 0.1 pm (0—99.9pm); 1 pm (over 100pm)
Accuracy 11-3%n or ;2.5pm
Memory Store/Recall Min/Max/Ave.99 Group Measurements
Mm-radius Work piece F; Convex 1.5mm/Concave 25mm
NF:Convex 3mm/ Concave 50mm
Min.measuring area 6mm
Min. sample thickness 0.3mm
Metric/Imperial Selectable
Operating condition Temp. 0—50°C ;,Humidity <95%
Battery indicator low battery indicator
Auto Power off.
Power supply 2x1.5V AAA(UM-4)battery
Dimensions & weight 130x65x35 mm 90g(not including battery)
Standard Accessories Probe (F/nF combine)‘0' Calibration Blocks, Calibration Foils, Operation Manual & Hard Carry case.
Optional accessories RS-232C Cable & software, USB Cable & software, Bluetooth data output.

Product Details:

Application:- Used for measuring thickness and corrosion of pressure vessels, chemical equipment,

boilers, oil storage tanks, etc. in industries of petroleum, shipbuilding, power station, and machine

manufacturing.In built probe(s)

Operating principle: magnetic induction/eddy current (F/NF)

Measuring range:0-1250um/0-50mil

Resolution; 0.1/1

Accuracy: ±1-3%n or ±2.5um

Min. measuring area: 6mm

Min. sample thickness: 0.3mm

Battery indicator: low battery indicator

Metric/ imperial: convertible

Power supply: 4×1.5V AAA(UM-4)battery

Auto power off

Operating conditions:0- 45℃(32-104),≤90%RH

Accessories: Carrying Case, Operational manual, F & NF Internal probe, Iron & Aluminum Substrate,

Calibration foil, RS-232C cable & software.

Model:CM8825FN

Price: 17484/--

Additional Information:

• Item Code: CM-8825FN

Product Details:

Application:-

Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, ship building, power station, and machine manufacturing.

Model;TM8811

Price; 11556/-

Additional Information:

• Item Code: TM-8811